THE SOLUTION FOR YOUR HANDHELD MIC IN HEAVY WINDS... • Fits all standard handheld microphones• For heavy wind• Stays in place on the microphone• Built with Imitation Fur• Reduces Wind Noise• Easy to Mount on Microphone• Designed in Denmark by sound lovers, for sound lovers The Big Windbubble provides some of the best wind protection for handheld microphones on the market. The air enters the bubble for a short visit, finds it rather dull, and quickly leaves again without harming the microphone inside. So instead of the wind hammering on the microphone and making those horrible “ I’m in the middle of a hurricane”- sounds, it passes right through. The outside consists of carefully chosen black faux-fur that is soft, fluffy and even, and help make sure that you get the best possible results when recording outdoors.There is a smooth mesh lining underneath the fur and an elastic mount at the bottom, which makes it easy and secure to fit the Big Windbubble on all standard handheld microphones. Height: 10 cm (3.9”). Diameter: 5.2 cm (2.0”) Weight: 100g (incl. packaging) Long Haired Item code: BBI-BWB-BK Short Haired Item code: BBI-BWB-BKS

Read more less

THE CUB Build for the Sanken CUB-01 Mounts easily with elastic band Comes in black and in grey Designed in Denmark by sound lovers, for sound lovers A great microphone deserves great wind protection. That is why we developed and designed The Cub to fit just one microphone, the Sanken CUB-01. The Cub has a wide elastic area that allows it to easily slide over the flat construction of the CUB-01 microphone. The elastic is topped with a “hat” made from the carefully chosen faux-fur that is also used for our well-known Windbubbles. Each CUB comes in a practical metal box. Height: 3.5 cm (1.3”), Diameter: 5 cm (1,9”).

Read more less

THE PERFECT HIGH WIND FIT FOR YOUR SPACER BUBBLE For use in light to medium winds, The Short-Haired Spacer Cover, helps you strike a balance between wind protection and frequency transparency when using The Spacer Bubble. This product is a short-haired slip-on fur for people who already own The Spacer Bubble. FEATURES Easily adapt to your surroundings when you are in the field. Slides onto The Spacer Bubble when recording outside in light to medium winds. Fits in your Spacer Bubble mesh storage bag so you can keep everything close by. Slip-on fur made from Bubblebee Industries' best imitation fur (high density of hairs per cm2) which allows for optimal frequency transparency and effective wind protection. Save valuable time while getting best quality. Quick drying fur; if it gets wet simply place it in the aerated mesh bag and allow it to dry naturally. Comes in five different sizes to fit all the seven different Spacer Bubbles. Designed in Denmark by sound lovers, for sound lovers The short-haired Spacer Cover is made out of the same high-quality faux-fur as used for our Short-Haired Windkillers. The big difference between The Spacer Cover and The Windkiller is, that The Spacer Cover is designed to slip over your Spacer Bubble and fit perfectly, allowing you to adapt to stronger winds quickly and easily. The inside of the Spacer Cover is made of a durable polyester mix allowing it to easily slide onto the Spacer Bubble base. Constructed with a sturdy leather brim the Spacer Cover will stay firmly in place when it is mounted. This polyester mix is tested to make sure you get the most linear frequencies when you use The Spacer Bubble.

Read more less

THE PERFECT HIGH WIND FIT FOR YOUR SPACER BUBBLE For use in light to medium winds, The Short-Haired Spacer Cover, helps you strike a balance between wind protection and frequency transparency when using The Spacer Bubble. This product is a short-haired slip-on fur for people who already own The Spacer Bubble. FEATURES Easily adapt to your surroundings when you are in the field. Slides onto The Spacer Bubble when recording outside in light to medium winds. Fits in your Spacer Bubble mesh storage bag so you can keep everything close by. Slip-on fur made from Bubblebee Industries' best imitation fur (high density of hairs per cm2) which allows for optimal frequency transparency and effective wind protection. Save valuable time while getting best quality. Quick drying fur; if it gets wet simply place it in the aerated mesh bag and allow it to dry naturally. Comes in five different sizes to fit all the seven different Spacer Bubbles. Designed in Denmark by sound lovers, for sound lovers The short-haired Spacer Cover is made out of the same high-quality faux-fur as used for our Short-Haired Windkillers. The big difference between The Spacer Cover and The Windkiller is, that The Spacer Cover is designed to slip over your Spacer Bubble and fit perfectly, allowing you to adapt to stronger winds quickly and easily. The inside of the Spacer Cover is made of a durable polyester mix allowing it to easily slide onto the Spacer Bubble base. Constructed with a sturdy leather brim the Spacer Cover will stay firmly in place when it is mounted. This polyester mix is tested to make sure you get the most linear frequencies when you use The Spacer Bubble.

Read more less

THE PERFECT HIGH WIND FIT FOR YOUR SPACER BUBBLE For use in light to medium winds, The Short-Haired Spacer Cover, helps you strike a balance between wind protection and frequency transparency when using The Spacer Bubble. This product is a short-haired slip-on fur for people who already own The Spacer Bubble. FEATURES Easily adapt to your surroundings when you are in the field. Slides onto The Spacer Bubble when recording outside in light to medium winds. Fits in your Spacer Bubble mesh storage bag so you can keep everything close by. Slip-on fur made from Bubblebee Industries' best imitation fur (high density of hairs per cm2) which allows for optimal frequency transparency and effective wind protection. Save valuable time while getting best quality. Quick drying fur; if it gets wet simply place it in the aerated mesh bag and allow it to dry naturally. Comes in five different sizes to fit all the seven different Spacer Bubbles. Designed in Denmark by sound lovers, for sound lovers The short-haired Spacer Cover is made out of the same high-quality faux-fur as used for our Short-Haired Windkillers. The big difference between The Spacer Cover and The Windkiller is, that The Spacer Cover is designed to slip over your Spacer Bubble and fit perfectly, allowing you to adapt to stronger winds quickly and easily. The inside of the Spacer Cover is made of a durable polyester mix allowing it to easily slide onto the Spacer Bubble base. Constructed with a sturdy leather brim the Spacer Cover will stay firmly in place when it is mounted. This polyester mix is tested to make sure you get the most linear frequencies when you use The Spacer Bubble.

Read more less

THE PERFECT HIGH WIND FIT FOR YOUR SPACER BUBBLE For use in light to medium winds, The Short-Haired Spacer Cover, helps you strike a balance between wind protection and frequency transparency when using The Spacer Bubble. This product is a short-haired slip-on fur for people who already own The Spacer Bubble. FEATURES Easily adapt to your surroundings when you are in the field. Slides onto The Spacer Bubble when recording outside in light to medium winds. Fits in your Spacer Bubble mesh storage bag so you can keep everything close by. Slip-on fur made from Bubblebee Industries' best imitation fur (high density of hairs per cm2) which allows for optimal frequency transparency and effective wind protection. Save valuable time while getting best quality. Quick drying fur; if it gets wet simply place it in the aerated mesh bag and allow it to dry naturally. Comes in five different sizes to fit all the seven different Spacer Bubbles. Designed in Denmark by sound lovers, for sound lovers The short-haired Spacer Cover is made out of the same high-quality faux-fur as used for our Short-Haired Windkillers. The big difference between The Spacer Cover and The Windkiller is, that The Spacer Cover is designed to slip over your Spacer Bubble and fit perfectly, allowing you to adapt to stronger winds quickly and easily. The inside of the Spacer Cover is made of a durable polyester mix allowing it to easily slide onto the Spacer Bubble base. Constructed with a sturdy leather brim the Spacer Cover will stay firmly in place when it is mounted. This polyester mix is tested to make sure you get the most linear frequencies when you use The Spacer Bubble.

Read more less

The Spacer Bubble, is a multi-piece adaptable windshield solution for shotgun microphones designed specifically for boom operators, camera folks, sound mixers and all sound recordists who experience changing conditions. The Spacer Bubble includes the Spacer Base, Long-Haired Fur Cover and a carry pouch. A short-haired fur cover is available separately if you need it. The Spacer Bubble is available in red, black, green and blue. FEATURES: Switch locations fast and always get the best audio transparency while blocking unwanted noise from vocal plosives, boom 'swoosh' and wind. Specially designed rubber base for super easy and secure mounting. Base windshield made from highly efficient mesh to allow your microphone to sound as naked as possible. Slip-on fur made from Bubblebee Industries' best imitation fur (high density of hairs per cm2) which allows for optimal frequency transparency and effective wind protection. Quick drying fur; if it gets wet simply place it in the aerated mesh bag and allow it to dry naturally. Available in seven different sizes - to ensure you find a size that perfectly fits your favourite shotgun mic. Save valuable time while getting the best quality. Practical mesh bag included for easy storage and fast mounting. Designed in Denmark by sound lovers, for sound lovers. The Spacer Bubble shotgun microphone windshield is constructed of a noise-free mesh base, with a coarse foam inside and our specially designed rubber mount at the bottom. The combination of the foam and the mesh provides the perfect conditions for recording indoors. And if you suddenly have to act fast and go outside, simply slip-on the long-haired fur and experience the optimal transparency within seconds. When your recordings are wrapped, you can always keep track of your Spacer Bubble by leaving on the base on your boom or camera mic, and collecting the slip-on fur in the included practical mesh storage bag. That way you’ll always be ready! The materials used in The Spacer Bubble have been carefully selected and tested to ensure you are able to stay protected from the wind, whilst retaining as much of your microphones original frequency response as possible. If you're working in light to medium winds, we also have The Short-Haired Spacer Cover (sold separately) to allow you to further strike a balance between wind protection and frequency transparency. WHAT’S INCLUDED: 1x The Spacer Bubble 1x The Long-Haired Spacer Cover 1x Mesh Storage Bag   WHICH SPACER BUBBLE SIZE?We offer five different lengths and two different mount sizes: Weight XS:Mesh base: 40g (1,4oz)Long-haired slip on fur: 20g (0,7oz) Full weight w/ packaging: 260g (9,1oz) Weight S:Mesh base: 50g (1,7oz)Long-haired slip on fur: 25g (0,8oz)Full weight w/ packaging: 275g (9,7oz)   Weight M:Mesh base: 55g (1,9oz) Long-haired slip on fur: 30g (1oz)Full weight w/ packaging: 290g (10,2oz) Weight L:Mesh base: 60g (2,1oz)Long-haired slip on fur: 50g (1,7oz)Full weight w/ packaging: 300g (10,5oz) Weight XL:Mesh base: 65g (2,2oz)Long-haired slip on fur: 50g (1,7oz)Full weight w/ packaging:305g (10,7oz) Big Mount: Weight XS Big Mount:Mesh base: 40g (1,4oz) Long-haired slip on fur: 20g (0,7oz)Full weight w/ packaging: 260g (9,1oz) Weight XL Big Mount:Mesh base: 65g (2,2oz)Long-haired slip on fur: 50g (1,7oz)Full weight w/ packaging: 305g1 (0,7oz)

Read more less

The Spacer Bubble, is a multi-piece adaptable windshield solution for shotgun microphones designed specifically for boom operators, camera folks, sound mixers and all sound recordists who experience changing conditions. The Spacer Bubble includes the Spacer Base, Long-Haired Fur Cover and a carry pouch. A short-haired fur cover is available separately if you need it. Each component of this Spacer Bubble is PMS colour 2728c (chroma blue), the perfect tool to allow you to get your microphone closer to the sound source in blue screen environments. The Spacer Bubble is available in red, black, green and blue. FEATURES: Switch locations fast and always get the best audio transparency while blocking unwanted noise from vocal plosives, boom 'swoosh' and wind. Specially designed rubber base for super easy and secure mounting. Base windshield made from highly efficient mesh to allow your microphone to sound as naked as possible. Slip-on fur made from Bubblebee Industries' best imitation fur (high density of hairs per cm2) which allows for optimal frequency transparency and effective wind protection. Quick drying fur; if it gets wet simply place it in the aerated mesh bag and allow it to dry naturally. Available in seven different sizes - to ensure you find a size that perfectly fits your favourite shotgun mic. Save valuable time while getting the best quality. Practical mesh bag included for easy storage and fast mounting. Designed in Denmark by sound lovers, for sound lovers. The Spacer Bubble shotgun microphone windshield is constructed of a noise-free mesh base, with a coarse foam inside and our specially designed rubber mount at the bottom. The combination of the foam and the mesh provides the perfect conditions for recording indoors. And if you suddenly have to act fast and go outside, simply slip-on the long-haired fur and experience the optimal transparency within seconds. When your recordings are wrapped, you can always keep track of your Spacer Bubble by leaving on the base on your boom or camera mic, and collecting the slip-on fur in the included practical mesh storage bag. That way you’ll always be ready! The materials used in The Spacer Bubble have been carefully selected and tested to ensure you are able to stay protected from the wind, whilst retaining as much of your microphones original frequency response as possible. If you're working in light to medium winds, we also have The Short-Haired Spacer Cover (sold separately) to allow you to further strike a balance between wind protection and frequency transparency. WHAT’S INCLUDED: 1x The Spacer Bubble 1x The Long-Haired Spacer Cover 1x Mesh Storage Bag   WHICH SPACER BUBBLE SIZE?We offer five different lengths and two different mount sizes: Weight XS:Mesh base: 40g (1,4oz)Long-haired slip on fur: 20g (0,7oz) Full weight w/ packaging: 260g (9,1oz) Weight S:Mesh base: 50g (1,7oz)Long-haired slip on fur: 25g (0,8oz)Full weight w/ packaging: 275g (9,7oz)   Weight M:Mesh base: 55g (1,9oz) Long-haired slip on fur: 30g (1oz)Full weight w/ packaging: 290g (10,2oz) Weight L:Mesh base: 60g (2,1oz)Long-haired slip on fur: 50g (1,7oz)Full weight w/ packaging: 300g (10,5oz) Weight XL:Mesh base: 65g (2,2oz)Long-haired slip on fur: 50g (1,7oz)Full weight w/ packaging:305g (10,7oz) Big Mount: Weight XS Big Mount:Mesh base: 40g (1,4oz) Long-haired slip on fur: 20g (0,7oz)Full weight w/ packaging: 260g (9,1oz) Weight XL Big Mount:Mesh base: 65g (2,2oz)Long-haired slip on fur: 50g (1,7oz)Full weight w/ packaging: 305g1 (0,7oz)

Read more less

The Spacer Bubble, is a multi-piece adaptable windshield solution for shotgun microphones designed specifically for boom operators, camera folks, sound mixers and all sound recordists who experience changing conditions. The Spacer Bubble includes the Spacer Base, Long-Haired Fur Cover and a carry pouch. A short-haired fur cover is available separately if you need it. Each component of this Spacer Bubble is PMS colour 354c (chroma green), the perfect tool to allow you to get your microphone closer to the sound source in green screen environments. The Spacer Bubble is available in red, black, green and blue. FEATURES: Switch locations fast and always get the best audio transparency while blocking unwanted noise from vocal plosives, boom 'swoosh' and wind. Specially designed rubber base for super easy and secure mounting. Base windshield made from highly efficient mesh to allow your microphone to sound as naked as possible. Slip-on fur made from Bubblebee Industries' best imitation fur (high density of hairs per cm2) which allows for optimal frequency transparency and effective wind protection. Quick drying fur; if it gets wet simply place it in the aerated mesh bag and allow it to dry naturally. Available in seven different sizes - to ensure you find a size that perfectly fits your favourite shotgun mic. Save valuable time while getting the best quality. Practical mesh bag included for easy storage and fast mounting. Designed in Denmark by sound lovers, for sound lovers. The Spacer Bubble shotgun microphone windshield is constructed of a noise-free mesh base, with a coarse foam inside and our specially designed rubber mount at the bottom. The combination of the foam and the mesh provides the perfect conditions for recording indoors. And if you suddenly have to act fast and go outside, simply slip-on the long-haired fur and experience the optimal transparency within seconds. When your recordings are wrapped, you can always keep track of your Spacer Bubble by leaving on the base on your boom or camera mic, and collecting the slip-on fur in the included practical mesh storage bag. That way you’ll always be ready! The materials used in The Spacer Bubble have been carefully selected and tested to ensure you are able to stay protected from the wind, whilst retaining as much of your microphones original frequency response as possible. If you're working in light to medium winds, we also have The Short-Haired Spacer Cover (sold separately) to allow you to further strike a balance between wind protection and frequency transparency. WHAT’S INCLUDED: 1x The Spacer Bubble 1x The Long-Haired Spacer Cover 1x Mesh Storage Bag   WHICH SPACER BUBBLE SIZE?We offer five different lengths and two different mount sizes: Weight XS:Mesh base: 40g (1,4oz)Long-haired slip on fur: 20g (0,7oz) Full weight w/ packaging: 260g (9,1oz) Weight S:Mesh base: 50g (1,7oz)Long-haired slip on fur: 25g (0,8oz)Full weight w/ packaging: 275g (9,7oz)   Weight M:Mesh base: 55g (1,9oz) Long-haired slip on fur: 30g (1oz)Full weight w/ packaging: 290g (10,2oz) Weight L:Mesh base: 60g (2,1oz)Long-haired slip on fur: 50g (1,7oz)Full weight w/ packaging: 300g (10,5oz) Weight XL:Mesh base: 65g (2,2oz)Long-haired slip on fur: 50g (1,7oz)Full weight w/ packaging:305g (10,7oz) Big Mount: Weight XS Big Mount:Mesh base: 40g (1,4oz) Long-haired slip on fur: 20g (0,7oz)Full weight w/ packaging: 260g (9,1oz) Weight XL Big Mount:Mesh base: 65g (2,2oz)Long-haired slip on fur: 50g (1,7oz)Full weight w/ packaging: 305g1 (0,7oz)

Read more less

The Spacer Bubble, is a multi-piece adaptable windshield solution for shotgun microphones designed specifically for boom operators, camera folks, sound mixers and all sound recordists who experience changing conditions. The Spacer Bubble includes the Spacer Base, Long-Haired Fur Cover and a carry pouch. A short-haired fur cover is available separately if you need it. Each component of this Spacer Bubble is PMS colour 2035 (Red). The Spacer Bubble is available in red, black, green and blue. FEATURES: Switch locations fast and always get the best audio transparency while blocking unwanted noise from vocal plosives, boom 'swoosh' and wind. Specially designed rubber base for super easy and secure mounting. Base windshield made from highly efficient mesh to allow your microphone to sound as naked as possible. Slip-on fur made from Bubblebee Industries' best imitation fur (high density of hairs per cm2) which allows for optimal frequency transparency and effective wind protection. Quick drying fur; if it gets wet simply place it in the aerated mesh bag and allow it to dry naturally. Available in seven different sizes - to ensure you find a size that perfectly fits your favourite shotgun mic. Save valuable time while getting the best quality. Practical mesh bag included for easy storage and fast mounting. Designed in Denmark by sound lovers, for sound lovers. The Spacer Bubble shotgun microphone windshield is constructed of a noise-free mesh base, with a coarse foam inside and our specially designed rubber mount at the bottom. The combination of the foam and the mesh provides the perfect conditions for recording indoors. And if you suddenly have to act fast and go outside, simply slip-on the long-haired fur and experience the optimal transparency within seconds. When your recordings are wrapped, you can always keep track of your Spacer Bubble by leaving on the base on your boom or camera mic, and collecting the slip-on fur in the included practical mesh storage bag. That way you’ll always be ready! The materials used in The Spacer Bubble have been carefully selected and tested to ensure you are able to stay protected from the wind, whilst retaining as much of your microphones original frequency response as possible. If you're working in light to medium winds, we also have The Short-Haired Spacer Cover (sold separately) to allow you to further strike a balance between wind protection and frequency transparency. WHAT’S INCLUDED: 1x The Spacer Bubble 1x The Long-Haired Spacer Cover 1x Mesh Storage Bag   WHICH SPACER BUBBLE SIZE?We offer five different lengths and two different mount sizes: Weight XS:Mesh base: 40g (1,4oz)Long-haired slip on fur: 20g (0,7oz) Full weight w/ packaging: 260g (9,1oz) Weight S:Mesh base: 50g (1,7oz)Long-haired slip on fur: 25g (0,8oz)Full weight w/ packaging: 275g (9,7oz)   Weight M:Mesh base: 55g (1,9oz) Long-haired slip on fur: 30g (1oz)Full weight w/ packaging: 290g (10,2oz) Weight L:Mesh base: 60g (2,1oz)Long-haired slip on fur: 50g (1,7oz)Full weight w/ packaging: 300g (10,5oz) Weight XL:Mesh base: 65g (2,2oz)Long-haired slip on fur: 50g (1,7oz)Full weight w/ packaging:305g (10,7oz) Big Mount: Weight XS Big Mount:Mesh base: 40g (1,4oz) Long-haired slip on fur: 20g (0,7oz)Full weight w/ packaging: 260g (9,1oz) Weight XL Big Mount:Mesh base: 65g (2,2oz)Long-haired slip on fur: 50g (1,7oz)Full weight w/ packaging: 305g1 (0,7oz)

Read more less

THE ANSWER TO YOUR PRAYERS IN COMPACT WIND PROTECTION...  Made for your boom or camera microphone. Handles medium to mild wind. Made from the best imitation fur (high amount of hair pieces per cm2) which allows for optimal wind protection versus frequency transparency. Specially designed rubber base for super easy and secure mounting. When wet, simply dry it up and shake the fur back into a perfect shape.  Designed in Denmark by sound lovers, for sound lovers.  The Windkiller is a short-haired wind protector that fits shotgun microphones from Audio-Technica, Audix, DPA, JVC, Neumann, Røde, Sanken, Schoeps, Sennheiser, Sony and others. See Chart. The core of the Windkiller consists of high quality coarse foam with Bubblebee’s carefully chosen soft and fluffy imitation fur on top. This faux-fur is highly durable, works excellent to block the wind and is aesthetically pleasing for the eye. In the bottom, The Windkiller is constructed with our specially designed rubber mount that grips unto your microphone while still making it perfectly easy to slide the Windkiller on and off. The Windkiller comes in five different sizes, from XS to XL, all with an rubber opening in the bottom that fits shotgun microphones with a diameter of 18-24 mm (0.7”-0.9”). THE BIG MOUNT These come in XS and XL sizes with a rubber opening in the bottom that fits microphones with a wider diameter of 23-26 mm (0.9"-1,02"). There is 5 sizes and two big mount versions to cover all major variants of shotgun microphone: Big Mount:

Read more less

The Windkiller SE (Special Edition) uses Bubblebees finest imitation fur to effectively protect your DPA 4018G or 4018E mic against wind noise. The outer layer of The Windkiller SE for DPA 4018G features a high-density, soft, multi-pile fur to gradually slow the wind down before reaching your mic. Inside, The Windkiller SE uses a super soft and smooth, open material. This allows your mic to sound as transparent as possible, whilst protecting your recordings against harmful wind noises. The black elastic band and press stud keeps The Windkiller SE firmly attached to your mic, whilst seamlessly blending into the windshield to remain discreet. When fitted correctly, The Windkiller SE holds a bubble of dead air around the front of the mic capsule, allowing the microphone to function as naturally as possible and keeping wind interference at bay. FEATURES: Designed to fit the DPA 4018G and DPA 4018E low profile supercardioid microphones. Uses the much-loved, multi-pile fur for the ultimate protection against wind noise. Transparent inner fabric maintains a very natural frequency response, on or off-axis. Manufactured in Denmark with quality and comfort in mind by sound lovers, for sound lovers. WHAT’S INCLUDED: 1 x The Windkiller SE for DPA 4018G  

Read more less

The Windkiller SE (Special Edition) uses Bubblebees finest imitation fur to effectively protect your DPA 4097 or 4099 mic against wind noise. On the outside, The Windkiller SE for DPA 4097 features a high-density, soft, multi-pile fur to gradually slow the wind down before reaching your mic. Inside, The Windkiller SE uses a soft and smooth, open material. This allows your mic to sound as transparent as possible, whilst protecting your recordings against harmful wind noises. The black elastic tab and press stud keeps The Windkiller SE firmly attached to your microphone, whilst seamlessly blending into the windshield to remain discreet. When fitted correctly, The Windkiller SE holds a bubble of dead air around the front of the mic capsule, allowing the microphone to function as naturally as possible and keeping wind interference at bay. FEATURES: Designed to fit the DPA 4097 Micro Shotgun and DPA 4099 Instrument microphones. Uses the much-loved, multi-pile fur for the ultimate protection against wind noise. Transparent inner fabric maintains a very natural frequency response, on or off-axis. Manufactured in Denmark with quality and comfort in mind by sound lovers, for sound lovers.

Read more less

The Windkiller SE (Special Edition) combines Bubblebees finest quality fur, design and manufacturing standards to effectively protect your portable recorder mic(s) against wind noise. On the outside, The Windkiller SE features a high-density, soft, multi-pile fur to gradually slow the wind down before reaching your mic. Inside, The Windkiller SE uses a soft and smooth, open material, allowing the mic to sound as transparent as possible, while protecting your recordings against harmful wind noises. The Windkiller SE can be affixed to the base of your portable recorders mic capsule(s) using an elasticated drawstring, while the leather band securely grips your portable/handheld recorder to keep the windshield in place and prevent wind from entering through the base. The Windkiller SE has been designed with an elasticated drawstring, encased in a soft leather band to securely grip your portable recorder to keep the windshield firmly in place and prevent wind from entering through the base. The base of The Windkiller SE should sit at the top of your recorder, allowing clear visibility of your recorders LCD display and accessibility to any controls or buttons on the side of your portable recorder. FEATURES Available in three sizes to fit the most widely available portable recorders on the market. Uses the much-loved, multi-pile fur for the ultimate protection against wind noise. Transparent inner fabric maintains a very natural frequency response. Includes an aerated mesh carry case. Manufactured in Denmark with quality and comfort in mind by sound lovers, for sound lovers. HOW TO FIT: Loosen the drawstring all the way and pull The Windkiller SE over the top part of the body of your portable recorder. Then tighten the drawstring to ensure the leather band is seated snugly around the body, below the built-in microphone diaphragm(s). When fitted correctly, The Windkiller SE holds a bubble of dead air around the mic capsule, allowing the microphone to function as naturally as possible and minimising wind interference in your recordings. SIZE GUIDE: XS - ∅ 32mm - 46mm (BBI-WKSE-PR-XS) M - ∅ 52mm - 65mm (BBI-WKSE-PR-M) L - ∅ 55mm - 71mm (BBI-WKSE-PR-L) Compatibility Chart

Read more less