The Windbubble Pro - Large (Twin Pack)
£57.00
The Windbubble PRO microphone windshields will give you the ultimate wind protection you can get for you omni-directional lavalier, field recording or headset mic. Whatever the make or size of your mic, the Windbubble PRO range of premium quality furry windshields keeps away those horrible wind noises and allows the clean and clear frequencies in.
The Windbubble PRO lav mic windshield consists of a soft rubber mount. Unlike hard plastic mounts this special rubber mount absorbs shocks and stops vibrations transferring to your mic’s capsule. The rubber mount holds the furry windshield firmly in place on your mic, making sure it doesn't slip off. In addition to this, the rubber mount has a slight conical shape inside, which ensures you can't push your microphone too far into the windshield. This is very important to ensure that your microphone has a "bubble" of dead-air around the capsule for optimal wind protection and audio clarity. This means that your mic will consistently stay in the best possible position for maximum efficiency.
The fixed positioning of the mic using the rubber mount has given us the ability to engineer a smaller overall profile for the Windbubble PRO without compromising on the efficacy of the wind protection. However, each mount size is also available in a larger 'Extreme' version which consists of an inner foam core, surrounded by our much-loved multi-pile faux fur, to offer you an even greater level of wind protection for your microphone. These are especially helpful on those super windy exteriors and a perfect solution for factual, ENG and broadcast shoots.
Every Windbubble PRO is available in our renowned multi-pile faux fur. This unique fur has been specially designed with varying lengths of fur to help gradually slow down the wind particles before reaching the mic. The base of the fur has a higher density of shorter hairs and an acoustically transparent backing material for maximum frequency transparency. So instead of the wind hammering on the microphone and making those horrible, “I’m in the middle of a hurricane,” sounds, the capsule is kept in a calm bubble of wind protection and allowed to perform at its best.
The Windbubble PRO is also available in XS, Small and Medium, in a single or twin-pack of lapel mic windshields and in four different colours (black, grey, white, and beige) to allow you to colour-match to the costume or outfit of the talent.
Please note: The Windbubble PRO is only suitable for omnidirectional microphones. If you have a directional microphone, then the original Windbubble is the best microphone windshield for your mic.
WINDBUBBLE PRO FEATURES:
-
WORLD-RENOWNED PROTECTION FROM WIND
Best in the industry wind protection thanks to the bubble-effect and rubber mount in the design. The construction of the Windbubble PRO holds a quiet space of dead-air around the mic capsule, allowing it to perform the best way possible and delivering detailed and naturally transparent audio to your transmitter or recorder. -
WINDBUBBLE PROS WON'T FALL OFF
The rubber mount firmly grips your mic, ensuring the windshield will stay in place and you don't have to worry about it falling off mid-shoot. -
CHOOSE YOUR MODEL
The Windbubble PROs are available in a standard version, 'Extreme' version for greater wind protection or 'Extreme' Long-Haired for those super windy conditions. -
NATURAL SOUND
The fur and mesh construction makes The Windbubble PRO acoustically transparent to keep the sound very close to the microphone’s natural frequency response. -
MULTI-PILE FUR
The short, dense hair of the fur gives the Windbubble PRO a rounded and organic shape while the longer fur slows wind down gradually for best-in-class wind protection. The Bubblebee fur is less shiny than others, to better blend with skin, clothes and other surrounding materials. -
QUALITY YOU CAN TRUST
Designed in Denmark by sound lovers, for sound lovers!
It is important that you check the correct size(s) Windbubble PRO windshield suitable for your omnidirectional lavalier microphone. Please consult the size guide below to check this.
Large - Built for omni microphones with a diameter of 11.5-14.0mm
For Example:
LOM Uši, Uši Pro
MicBooster Clippy EM272
ITEM CODES:
BBI-WP2-L-BK
BBI-WP2-L-BK-E
BBI-WP2-L-BK-EL
Festive Closure - NO SHIPMENTS - 20th Dec - 2nd Jan
Orders placed before 13:00 weekdays usually ship the same day. Orders after this time will usually ship the next working day. We always do our best to get your order shipped as timely as possible. However, delivery timescales are estimates not guarantees.
Service | Delivery timescale and details | Price (Inc VAT) |
---|---|---|
Express |
1-2 Working days |
£9.99 |
Standard |
2-5 working days |
£5.99 |
Festive Closure - NO SHIPMENTS - 20th Dec - 2nd Jan
Express deliveries are not normally delivered on weekends or public holidays. We also do not ship on public/national holidays or weekends.
International Orders: The cost for your delivery will be calculated at checkout. NOTE: You may be required to pay additional Taxes/Duties to your local Government when the goods arrive into your country. These are NOT included in our prices.
Click for more information on Delivery
RETURNS
We offer returns within the first 30 days of your order. To be eligible for a return the product(s) must be unused, in its original state and retail packaging.
B2B orders are exempt from this policy.
Click for more information on Returns
Should any of this be unclear please Contact Us for clarification.
Need more than we currently have in stock? Seen it cheaper elsewhere? Whatever your query, let us know and we'll be happy to help.
-
Description
The Windbubble PRO microphone windshields will give you the ultimate wind protection you can get for you omni-directional lavalier, field recording or headset mic. Whatever the make or size of your mic, the Windbubble PRO range of premium quality furry windshields keeps away those horrible wind noises and allows the clean and clear frequencies in.
The Windbubble PRO lav mic windshield consists of a soft rubber mount. Unlike hard plastic mounts this special rubber mount absorbs shocks and stops vibrations transferring to your mic’s capsule. The rubber mount holds the furry windshield firmly in place on your mic, making sure it doesn't slip off. In addition to this, the rubber mount has a slight conical shape inside, which ensures you can't push your microphone too far into the windshield. This is very important to ensure that your microphone has a "bubble" of dead-air around the capsule for optimal wind protection and audio clarity. This means that your mic will consistently stay in the best possible position for maximum efficiency.
The fixed positioning of the mic using the rubber mount has given us the ability to engineer a smaller overall profile for the Windbubble PRO without compromising on the efficacy of the wind protection. However, each mount size is also available in a larger 'Extreme' version which consists of an inner foam core, surrounded by our much-loved multi-pile faux fur, to offer you an even greater level of wind protection for your microphone. These are especially helpful on those super windy exteriors and a perfect solution for factual, ENG and broadcast shoots.
Every Windbubble PRO is available in our renowned multi-pile faux fur. This unique fur has been specially designed with varying lengths of fur to help gradually slow down the wind particles before reaching the mic. The base of the fur has a higher density of shorter hairs and an acoustically transparent backing material for maximum frequency transparency. So instead of the wind hammering on the microphone and making those horrible, “I’m in the middle of a hurricane,” sounds, the capsule is kept in a calm bubble of wind protection and allowed to perform at its best.
The Windbubble PRO is also available in XS, Small and Medium, in a single or twin-pack of lapel mic windshields and in four different colours (black, grey, white, and beige) to allow you to colour-match to the costume or outfit of the talent.
Please note: The Windbubble PRO is only suitable for omnidirectional microphones. If you have a directional microphone, then the original Windbubble is the best microphone windshield for your mic.
WINDBUBBLE PRO FEATURES:
-
WORLD-RENOWNED PROTECTION FROM WIND
Best in the industry wind protection thanks to the bubble-effect and rubber mount in the design. The construction of the Windbubble PRO holds a quiet space of dead-air around the mic capsule, allowing it to perform the best way possible and delivering detailed and naturally transparent audio to your transmitter or recorder. -
WINDBUBBLE PROS WON'T FALL OFF
The rubber mount firmly grips your mic, ensuring the windshield will stay in place and you don't have to worry about it falling off mid-shoot. -
CHOOSE YOUR MODEL
The Windbubble PROs are available in a standard version, 'Extreme' version for greater wind protection or 'Extreme' Long-Haired for those super windy conditions. -
NATURAL SOUND
The fur and mesh construction makes The Windbubble PRO acoustically transparent to keep the sound very close to the microphone’s natural frequency response. -
MULTI-PILE FUR
The short, dense hair of the fur gives the Windbubble PRO a rounded and organic shape while the longer fur slows wind down gradually for best-in-class wind protection. The Bubblebee fur is less shiny than others, to better blend with skin, clothes and other surrounding materials. -
QUALITY YOU CAN TRUST
Designed in Denmark by sound lovers, for sound lovers!
It is important that you check the correct size(s) Windbubble PRO windshield suitable for your omnidirectional lavalier microphone. Please consult the size guide below to check this.
Large - Built for omni microphones with a diameter of 11.5-14.0mm
For Example:
LOM Uši, Uši Pro
MicBooster Clippy EM272ITEM CODES:
BBI-WP2-L-BK
BBI-WP2-L-BK-E
BBI-WP2-L-BK-EL -
WORLD-RENOWNED PROTECTION FROM WIND
-
Delivery & Returns
Festive Closure - NO SHIPMENTS - 20th Dec - 2nd Jan
Orders placed before 13:00 weekdays usually ship the same day. Orders after this time will usually ship the next working day. We always do our best to get your order shipped as timely as possible. However, delivery timescales are estimates not guarantees.
Service Delivery timescale and details Price (Inc VAT) Express
1-2 Working days
£9.99
Standard
2-5 working days
£5.99
Festive Closure - NO SHIPMENTS - 20th Dec - 2nd Jan
Express deliveries are not normally delivered on weekends or public holidays. We also do not ship on public/national holidays or weekends.
International Orders: The cost for your delivery will be calculated at checkout. NOTE: You may be required to pay additional Taxes/Duties to your local Government when the goods arrive into your country. These are NOT included in our prices.
Click for more information on Delivery
RETURNS
We offer returns within the first 30 days of your order. To be eligible for a return the product(s) must be unused, in its original state and retail packaging.
B2B orders are exempt from this policy.
Click for more information on Returns
Should any of this be unclear please Contact Us for clarification.
-
Product Enquiry
Need more than we currently have in stock? Seen it cheaper elsewhere? Whatever your query, let us know and we'll be happy to help.
-
Reviews